k b p c 15, 2 5 , 35g / w s e r i e s 1 of 4 ? 20 0 2 w on- t op e l e c t ron i cs kbpc15, 25, 35g/w series 15, 25, 35a glass passivated bridge rectifier features ! glass passivated die construction a a ! low reverse leakage current c c ! low power loss, high efficiency g g ! electrically isolated epoxy case for ~ ~ + maximum heat dissipation d + c c ! case to terminal isolation voltage 2500v - ~ - ~ d h h mechanical data e e ! case: epoxy case with heat sink internally b b mounted in the bridge encapsulation metal heat sink ! terminals: plated leads solderable per kbpc-g kbpc-gw mil-std-202, method 208 ! polarity: symbols marked on case ! mou n ti n g: t h r ough h o le f or # 10 s c r e w ! weight: kbpc-g 24 grams (approx.) kbpc-gw 21 grams (approx.) ! marking: type number "w? suffix designates wire leads no suffix designates faston terminals * a l l m o d e l s a r e a v a i l a b l e o n b ( h e i g h t ) = 7 . 9 m m m a x . e p o x y c a s e maximum ratings and electrical characteristics @t a =25c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristics symbol -00g/w -01g/w -02g/w -04g/w -06g/w -08g/w -10g/w unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectifier output current @t c = 55c kbpc15 kbpc25 kbpc35 i o 15 25 35 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) kbpc15 kbpc25 kbpc35 i fsm 300 300 400 a forward voltage drop (per element) kbpc15 @i f = 7.5a kbpc25 @i f = 12.5a kbpc35 @i f = 17.5a v fm 1.1 v peark reverse current @t c = 25c at rated dc blocking voltage @t c = 125c i rm 5.0 500 a i 2 t rating for fusing (t < 8.3ms) (note 1) kbpc15 kbpc25 kbpc35 i 2 t 375 375 660 a 2 s wte power semiconductors kbpc-g kbpc-gw dim min max min max a 28.40 28.70 28.40 28.70 b 10.97 11.23 10.97 11.23 c 15.70 16.70 17.10 19.10 d 17.50 18.50 10.90 11.90 e 22.86 25.40 30.50 ? g h o l e f o r # 10 sc r e w , 5 . 08 ? n o m i nal h 6.35 typical 0.97? 1.07? all dimension in mm
k b p c 15, 2 5 , 35g / w s e r i e s 2 of 4 ? 20 0 2 w on- t op e l e c t ron i cs maximum ratings and electrical characteristics @t a =25c unless otherwise specified typical junction capacitance (per element) (note 2) c j 300 pf typical thermal resistance junction to case (per element) (note 3) kbpc15 kbpc25 kbpc35 r jc 5.3 3.6 3.0 k/w rms isolation voltage from case to lead v iso 2500 v operating and storage temperature range t j , t stg -65 to +150 c note: 1. measured at non-repetitive, for t > 1ms and < 8.3ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. 3. thermal resistance junction to case mounted on heatsink.
0.01 0.1 1.0 10 100 0 0.4 0.8 1.0 1.6 1.80.60.2 1.2 1.4 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fig. 2 typical forward characteristics (per element) f t = 25c j pulse width = 300s 0 100 200 300 400 1 10 100 i , peak fwd. surge current (a) fsm number of cycles at 60 hz fig. 3 max non-repetitive surge current single half-sine wave (jedec method) t = 150c j 10 100 1000 0.1 1.0 10 100 c , capacitance (pf) j v , reverse voltage (v) fig. 4 typical junction capacitance (per element) r f=1mhz t = 25c j 0.01 0.1 1.0 10 100 4020 60 80 100 120 140 i , instantaneous reverse current (a) r percent of rated peak reverse voltage (%) fig. 5 typical reverse characteristics (per element) t = 125c j t = 25c j 0 10 20 0 25 50 7 5 100 125 150 i , average forward current (a) f t , case temperature (c) fig. 1 forward. current derating curve c resistive or inductive load mounted on a 220x220x50mm al plate heatsink 30 40 k b p c 15 k b p c 2 5 k b p c 3 5 k b p c 35 k b p c 15 , 2 5 k b p c 15 , 2 5 k b p c 3 5 k b p c 15, 2 5 , 35g / w s e r i e s 3 of 4 ? 20 0 2 w on- t op e l e c t ron i cs
kbpc15, 25, 35g/w series 4 of 4 ? 2002 won-top electronics ordering information product no. package type shipping quantity kbpcxx00g square bridge 50 units/box kbpcxx00gw square bridge 50 units/box kbpcxx01g square bridge 50 units/box kbpcxx01gw square bridge 50 units/box kbpcxx02g square bridge 50 units/box kbpcxx02gw square bridge 50 units/box kbpcxx04g square bridge 50 units/box kbpcxx04gw square bridge 50 units/box kbpcxx06g square bridge 50 units/box kbpcxx06gw square bridge 50 units/box kbpcxx08g square bridge 50 units/box kbpcxx08gw square bridge 50 units/box kbpcxx10g square bridge 50 units/box kbpcxx10gw square bridge 50 units/box shipping quantity given is for minimum packing quantity only. for minimum order quantity, please consult the sales department. won-top electronics co., ltd (wte) has checked all information carefully and believes it to be correct and accurate. however, w te cannot assume any responsibility for inaccuracies. furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. wte reserves the right to change any or all information herein without further notice. warning : do not use in life support equipment. wte power semiconductor products are not authorized for use as critical components in l ife support devices or systems without the express written approval. we power your everyday. won-top electronics co., ltd. no. 44 yu kang north 3rd road, chine chen dist., kaohsiung, taiwan phone: 886-7-822-5408 or 886-7-822-5410 fax: 886-7-822-5417 email: sales@wontop.com internet: http://www.wontop.com
|
